psmeca

Plot focal mechanisms

Synopsis

gmt psmeca [ table ] -Jparameters -Rregion -Sformat[scale][+aangle][+ffont][+jjustify][+odx[/dy]] [ -A[+ppen][+ssize] ] [ -B[p|s]parameters ] [ -Ccpt ] [ -Ddepmin/depmax ] [ -Efill ] [ -Fmode[args] ] [ -Gfill ] [ -H[scale] ] [ -I[intens] ] [ -K ] [ -L[pen] ] [ -M ] [ -N ] [ -O ] [ -P ] [ -Tnplane[pen] ] [ -U[stamp] ] [ -V[level] ] [ -Wpen ] [ -X[a|c|f|r][xshift] ] [ -Y[a|c|f|r][yshift] ] [ -dinodata ] [ -eregexp ] [ -hheaders ] [ -iflags ] [ -pflags ] [ -qiflags ] [ -ttransp ] [ -:[i|o] ] [ --PAR=value ]

Note: No space is allowed between the option flag and the associated arguments.

Description

Reads data values from files [or standard input] and plots focal mechanisms.

Required Arguments

table

One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data columns. If no tables are given then we read from standard input.

-Jparameters

Specify the projection. (See full description) (See cookbook summary) (See projections table).

-Rwest/east/south/north[/zmin/zmax][+r][+uunit]

Specify the region of interest. The region may be specified in one of six ways:

1. -Rwest/east/south/north[+uunit]. This is the standard way to specify geographic regions when using map projections where meridians and parallels are rectilinear. The coordinates may be specified in decimal degrees or in [±]dd:mm[:ss.xxx][W|E|S|N] format. Optionally, append +uunit to specify a region in projected units (e.g., UTM meters) where west/east/south/north are Cartesian projected coordinates compatible with the chosen projection (-J) and unit is an allowable distance unit; we inversely project to determine the actual rectangular geographic region.

2. -Rwest/south/east/north+r. This form is useful for map projections that are oblique, making meridians and parallels poor choices for map boundaries. Here, we instead specify the lower left corner and upper right corner geographic coordinates, followed by the modifier +r. This form guarantees a rectangular map even though lines of equal longitude and latitude are not straight lines.

3. -Rg or -Rd. These forms can be used to quickly specify the global domain (0/360 for -Rg and -180/+180 for -Rd in longitude, with -90/+90 in latitude).

4. -Rcode1,code2,…[+e|r|Rincs]. This indirectly supplies the region by consulting the DCW (Digital Chart of the World) database and derives the bounding regions for one or more countries given by the codes. Simply append one or more comma-separated countries using the two-character ISO 3166-1 alpha-2 convention. To select a state within a country (if available), append .state, e.g, US.TX for Texas. To specify a whole continent, prepend = to any of the continent codes AF (Africa), AN (Antarctica), AS (Asia), EU (Europe), OC (Oceania), NA (North America), or SA (South America). The following modifiers can be appended:

   • +r to adjust the region boundaries to be multiples of the steps indicated by inc, xinc/yinc, or winc/einc/sinc/ninc [default is no adjustment]. For example, -RFR+r1 will select the national bounding box of France rounded to nearest integer degree.

   • +R to extend the region outward by adding the amounts specified by inc, xinc/yinc, or winc/einc/sinc/ninc [default is no extension].

   • +e to adjust the region boundaries to be multiples of the steps indicated by inc, xinc/yinc, or winc/einc/sinc/ninc, while ensuring that the bounding box extends by at least 0.25 times the increment [default is no adjustment].

5. -Rjustifylon0/lat0/nx/ny, where justify is a 2-character combination of L|C|R (for left, center, or right) and T|M|B (for top, middle, or bottom) (e.g., BL for lower left). The two character code justify indicates which point on a rectangular region region the lon0/lat0 coordinates refer to and the grid dimensions nx and ny are used with grid spacings given via -I to create the corresponding region. This method can be used when creating grids. For example, -RCM25/25/50/50 specifies a 50x50 grid centered on 25,25.

6. -Rgridfile. This will copy the domain settings found for the grid in specified file. Note that depending on the nature of the calling module, this mechanism will also set grid spacing and possibly the grid registration (see Grid registration: The -r option).

-Sformat[scale][+aangle][+ffont][+jjustify][+odx[/dy]]

Selects the meaning of the columns in the data file. scale adjusts the scaling of the radius of the “beach ball”, which will be proportional to the magnitude. scale is the size for magnitude = 5 (i.e. scalar seismic moment M0 = 4.0E23 dynes-cm). The color or shade of the compressive quadrants can be specified with the -G option. The color or shade of the extensive quadrants can be specified with the -E option. For each beachball, a text string can be specified to appear near the beachball [optional]. Append +aangle to change the angle of the text string; append +ffont to change its font (size,fontname,color); append +jjustify to change the text location relative to the beachball (default is above the beachball); append +o to offset the text string by dx/dy. Note: If scale is missing then we expect to read this value from the data record via the first column after the required columns for the symbol type.

In order to use the same file to plot cross-sections, depth is in third column. Nevertheless, it is possible to use “old style” psvelomeca input files without depth in third column using the -Fo option.

-Sa[scale][+ffont][+jjustify][+odx[/dy]]

Focal mechanisms in Aki and Richards convention. Parameters are expected to be in the following columns:

1,2: longitude, latitude of event (-: option interchanges order)

3: depth of event in kilometers

4,5,6: strike, dip and rake in degrees

7: magnitude

8,9: longitude, latitude at which to place beachball if -A is used (optional). Using 0,0 in columns 8 and 9 will plot the beach ball at the longitude, latitude given in columns 1 and 2. The -: option will interchange the order of columns (1,2) and (8,9).

10: Text string to appear near the beach ball (optional).

-Sc[scale][+ffont][+jjustify][+odx[/dy]]

Focal mechanisms in Global CMT convention. Parameters are expected to be in the following columns:

1,2: longitude, latitude of event (-: option interchanges order)

3: depth of event in kilometers

4,5,6: strike, dip, and rake of plane 1

7,8,9: strike, dip, and rake of plane 2

10,11: mantissa and exponent of moment in dyne-cm

12,13: longitude, latitude at which to place beachball if -A is used (optional). Using 0,0 in columns 12 and 13 will plot the beach ball at the longitude, latitude given in columns 1 and 2. The -: option will interchange the order of columns (1,2) and (12,13).

14: Text string to appear near the beach ball (optional).

-Sm|d|z[scale][+ffont][+jjustify][+odx[/dy]]

Seismic moment tensor. -Sm plots the full seismic moment tensor. -Sz plots the deviatoric part of the moment tensor (zero trace). -Sd plots the closest double couple defined from the moment tensor (zero trace and zero determinant). Global CMT moment tensors are deviatoric, so -Sm and -Sz will produce the same result, but -Sd will not, unless the input moment tensor is already a double couple. Parameters are expected to be in the following columns:

1,2: longitude, latitude of event (-: option interchanges order)

3: depth of event in kilometers

4,5,6,7,8,9: mrr, mtt, mff, mrt, mrf, mtf in 10*exponent dynes-cm

10: exponent

11,12: longitude, latitude at which to place beachball if -A is used (optional). Using 0,0 in columns 11 and 12 will plot the beach ball at the longitude, latitude given in columns 1 and 2. The -: option will interchange the order of columns (1,2) and (11,12).

13: Text string to appear near the beach ball (optional).

-Sp[scale][+ffont][+jjustify][+odx[/dy]]

Focal mechanisms given with partial data on both planes. Parameters are expected to be in the following columns:

1,2: longitude, latitude of event (-: option interchanges order)

3: depth of event in kilometers

4,5: strike, dip of plane 1

6: strike of plane 2

7: must be -1/+1 for a normal/inverse fault

8: magnitude

9,10: longitude, latitude at which to place beachball if -A is used (optional). Using 0,0 in columns 9 and 10 will plot the beach ball at the longitude, latitude given in columns 1 and 2. The -: option will interchange the order of columns (1,2) and (9,10).

11: Text string to appear near the beach ball (optional).

-Sx|y|t[scale][+ffont][+jjustify][+odx[/dy]]

Principal axis. Use -Sx to plot full seismic moment tensor. Use -Sy to plot the closest double couple defined from the moment tensor (zero trace and zero determinant). Use -St to plot the deviatoric part of the moment tensor (zero trace). Parameters are expected to be in the following columns:

1,2: longitude, latitude of event (-: option interchanges order)

3: depth of event in kilometers

4,5,6,7,8,9,10,11,12: value (in 10*exponent dynes-cm), azimuth, plunge of T, N, P axis.

13: exponent

14,15: longitude, latitude at which to place beachball if -A is used (optional). Using 0,0 in columns 14 and 15 will plot the beach ball at the longitude, latitude given in columns 1 and 2. The -: option will interchange the order of columns (1,2) and (14,15).

16: Text string to appear near the beach ball (optional).

Optional Arguments

-A[+ppen][+ssize]

Offsets focal mechanisms to the alternate longitudes, latitudes given in the last two columns of the input file before the (optional) text string. We will draw a line connecting the original and relocated beachball positions and optionally place a small circle at the original location. Use +ssize to set the diameter of the circle [no circle]. The line pen defaults to that given via -W but can be overridden by using +ppen [0.25p].

-B[p|s]parameters

Set map boundary frame and axes attributes. (See full description) (See cookbook information).

-Ccpt

Give a CPT and let compressive part color be determined by the z-value in the third column.

-Ddepmin/depmax

Plots events between depmin and depmax.

-Efill (more …)

Selects filling of extensive quadrants. [Default is white].

-Fmode[args]

Sets one or more attributes; repeatable. The various combinations are

-Fa[size[/Psymbol[Tsymbol]]]

Computes and plots P and T axes with symbols. Optionally specify size and (separate) P and T axis symbols from the following: (c) circle, (d) diamond, (h) hexagon, (i) inverse triangle, (p) point, (s) square, (t) triangle, (x) cross. [Default: 6p/cc]

-Fefill

Sets the color or fill pattern for the T axis symbol. [Default as set by -E]

-Fgfill

Sets the color or fill pattern for the P axis symbol. [Default as set by -G]

-Fo

Use the psvelomeca input format without depth in the third column.

-Fp[pen]

Draws the P axis outline using default pen (see -W), or sets pen attributes.

-Fr[fill]

Draw a box behind the label (if any). [Default fill is white]

-Ft[pen]

Draws the T axis outline using default pen (see -W), or sets pen attributes.

-Fz[pen]

Overlay zero trace moment tensor using default pen (see -W), or sets pen attributes.

-Gfill (more …)

Selects filling of focal mechanisms. By convention, the compressional quadrants of the focal mechanism beach balls are shaded. [Default is black].

-H[scale]

Scale symbol sizes and pen widths on a per-record basis using the scale read from the data set, given as the first column after the (optional) size column [no scaling]. The symbol size is either provided by -S or via the input size column. Alternatively, append a constant scale that should be used instead of reading a scale column.

-Iintens

Use the supplied intens value (nominally in the -1 to +1 range) to modulate the compressional fill color by simulating illumination [none]. If no intensity is provided we will instead read intens from an extra data column after the required input columns determined by -S.

-L[pen]

Draws the “beach ball” outline with pen attributes instead of with the default pen set by -W.

-M

Use the same size for any magnitude. Size is given with -S.

-N

Does NOT skip symbols that fall outside frame boundary specified by -R [Default plots symbols inside frame only].

-T[nplane][/pen]

Plots the nodal planes and outlines the bubble which is transparent. If nplane is

0: both nodal planes are plotted;

1: only the first nodal plane is plotted;

2: only the second nodal plane is plotted.

Append /pen to set the pen attributes for this feature. Default pen is as set by -W. [Default: 0].

For double couple mechanisms, the -T option renders the beach ball transparent by drawing only the nodal planes and the circumference. For non-double couple mechanisms, -T0 option overlays best double couple transparently.

-U[label|+c][+jjust][+odx/dy]

Draw GMT time stamp logo on plot. (See full description) (See cookbook information).

-V[level]

Select verbosity level [w]. (See full description) (See cookbook information).

-Wpen

Set pen attributes for all lines and the outline of symbols [Defaults: default,black,solid]. This setting applies to -A, -L, -T, -Fp, -Ft, and -Fz, unless overruled by options to those arguments.

-X[a|c|f|r][xshift]

Shift plot origin. (See full description) (See cookbook information).

-Y[a|c|f|r][yshift]

Shift plot origin. (See full description) (See cookbook information).

-dinodata (more …)

Replace input columns that equal nodata with NaN.

-e[~]“pattern” | -e[~]/regexp/[i] (more …)

Only accept data records that match the given pattern.

-h[i|o][n][+c][+d][+msegheader][+rremark][+ttitle] (more …)

Skip or produce header record(s).

-icols[+l][+ddivisor][+sscale][+ooffset][,…][,t[word]] (more …)

Select input columns and transformations (0 is first column, t is trailing text, append word to read one word only).

-p[x|y|z]azim[/elev[/zlevel]][+wlon0/lat0[/z0]][+vx0/y0] (more …)

Select perspective view.

-qi[~]rows[+ccol][+a|f|s] (more …)

Select input rows or data range(s) [default is all rows].

-t[transp[/transp2]][+f][+s]

Set transparency level for an overlay, in [0-100] percent range. [Default is 0, i.e., opaque]. Only visible when PDF or raster format output is selected. Only the PNG format selection adds a transparency layer in the image (for further processing). If given, transp applies to both fill and stroke, but you can limit the transparency to one of them by appending +f or +s for fill or stroke, respectively. Alternatively, append /transp2 to set separate transparencies for fills and strokes. If no transparencies are given then we expect to read them from the last numerical column(s). Use the modifiers to indicate which one(s) we should be reading (if both are requested, fill transparency is expected before stroke transparency in the column order). If just -t is given then we interpret it to mean -t+f for fill transparency only.

-:[i|o] (more …)

Swap 1st and 2nd column on input and/or output.

-^ or just -

Print a short message about the syntax of the command, then exit (NOTE: on Windows just use -).

-+ or just +

Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exit.

-? or no arguments

Print a complete usage (help) message, including the explanation of all options, then exit.

--PAR=value

Temporarily override a GMT default setting; repeatable. See gmt.conf for parameters.

Data Column Order

The -S option determines how many size columns are required to generate the selected symbol, but if size is not given then we expect to read size from file. In addition, your use of options -H, -I and -t will require extra columns. The order of the data record is fixed regardless of option order, even if not all items may be activated. We expect data columns to come in the following order:

lon lat depth symbol-columns [size] [scale] [intens] [transp [transp2]] [trailing-text]

where items given in brackets are optional and under the control of the stated options: -S without a size selects the optional size-columns, -H selects the optional scale column, -I selects the optional intens column, and -t selects the optional transp column(s). Trailing text is always optional. Notes: (1) depth is normally required but will not be expected if -Fo is given to meca. (2) You can use -i to rearrange your data record to match the expected format.

Classic Mode Arguments

These options are used to manipulate the building of layered GMT PostScript plots in classic mode. They are not available when using GMT modern mode.

-K (more …)

Do not finalize the PostScript plot.

-O (more …)

Append to existing PostScript plot.

-P (more …)

Select “Portrait” plot orientation.

Examples

The following file should give a normal-faulting CMT mechanism:

gmt psmeca -R239/240/34/35.2 -Jm4c -Sc2c << END > test.ps
# lon lat depth str dip slip st dip slip mant exp plon plat
239.384 34.556 12. 180 18 -88 0 72 -90 5.5 0 0 0
END

References

• Aki, K., & Richards, P. G. (1980). Quantitative seismology: theory and methods. San Francisco: W. H. Freeman.

• Dahlen, F. A., & Tromp, J. (1998). Theoretical global seismology. Princeton, N.J: Princeton University Press.

• Frohlich, C. (1996). Cliff’s Nodes Concerning Plotting Nodal Lines for P, SH and SV. Seismological Research Letters, 67(1), 16–24. https://doi.org/10.1785/gssrl.67.1.16

• Lay, T., & Wallace, T. C. (1995). Modern global seismology. San Diego: Academic Press.

Author

Genevieve Patau, Laboratory of Seismogenesis, Institut de Physique du Globe de Paris, Departement de Sismologie, Paris, France

See Also

pspolar, pscoupe, gmt, psbasemap, psxy