segy2grd

Converting SEGY data to a grid

Synopsis

gmt segy2grd segyfile -Ggrdfile -Iincrement -Rregion [ -A[n|z] ] [ -D[+xxname][+yyname][+zzname][+sscale][+ooffset][+ninvalid][+ttitle][+rremark] ] [ -L[nsamp] ] [ -M[ntraces] ] [ -Nnodata ] [ -Q<mode><value> ] [ -S[header] ] [ -V[level] ] [ -bibinary ] [ -:[i|o] ] [ --PAR=value ]

Note: No space is allowed between the option flag and the associated arguments.

Description

segy2grd reads an IEEE SEGY file and creates a binary grid file. Either a simple mapping (equivalent to xyz2grd -Z) or a more complicated averaging where a particular grid cell includes values from more than one sample in the SEGY file can be done. segy2grd will report if some of the nodes are not filled in with data. Such unconstrained nodes are set to a value specified by the user [Default is NaN]. Nodes with more than one value will be set to the average value.

Required Arguments

segyfile is an IEEE floating point SEGY file. Traces are all assumed to start at 0 time/depth.

-Ggrdfile

grdfile is the name of the binary output grid file.

-I

x_inc [and optionally y_inc] is the grid spacing. Append m to indicate minutes or s to indicate seconds.

-Rwest/east/south/north[/zmin/zmax][+r][+uunit]

Specify the region of interest. The region may be specified in one of six ways:

  1. -Rwest/east/south/north[+uunit]. This is the standard way to specify geographic regions when using map projections where meridians and parallels are rectilinear. The coordinates may be specified in decimal degrees or in [±]dd:mm[:ss.xxx][W|E|S|N] format. Optionally, append +uunit to specify a region in projected units (e.g., UTM meters) where west/east/south/north are Cartesian projected coordinates compatible with the chosen projection (-J) and unit is an allowable distance unit; we inversely project to determine the actual rectangular geographic region.

  2. -Rwest/south/east/north+r. This form is useful for map projections that are oblique, making meridians and parallels poor choices for map boundaries. Here, we instead specify the lower left corner and upper right corner geographic coordinates, followed by the modifier +r. This form guarantees a rectangular map even though lines of equal longitude and latitude are not straight lines.

  3. -Rg or -Rd. These forms can be used to quickly specify the global domain (0/360 for -Rg and -180/+180 for -Rd in longitude, with -90/+90 in latitude).

  4. -Rcode1,code2,…[+e|r|Rincs]. This indirectly supplies the region by consulting the DCW (Digital Chart of the World) database and derives the bounding regions for one or more countries given by the codes. Simply append one or more comma-separated countries using the two-character ISO 3166-1 alpha-2 convention. To select a state within a country (if available), append .state, e.g, US.TX for Texas. To specify a whole continent, prepend = to any of the continent codes AF (Africa), AN (Antarctica), AS (Asia), EU (Europe), OC (Oceania), NA (North America), or SA (South America). The following modifiers can be appended:

    • +r to adjust the region boundaries to be multiples of the steps indicated by inc, xinc/yinc, or winc/einc/sinc/ninc [default is no adjustment]. For example, -RFR+r1 will select the national bounding box of France rounded to nearest integer degree.

    • +R to extend the region outward by adding the amounts specified by inc, xinc/yinc, or winc/einc/sinc/ninc [default is no extension].

    • +e to adjust the region boundaries to be multiples of the steps indicated by inc, xinc/yinc, or winc/einc/sinc/ninc, while ensuring that the bounding box extends by at least 0.25 times the increment [default is no adjustment].

  5. -Rjustifylon0/lat0/nx/ny, where justify is a 2-character combination of L|C|R (for left, center, or right) and T|M|B (for top, middle, or bottom) (e.g., BL for lower left). The two character code justify indicates which point on a rectangular region region the lon0/lat0 coordinates refer to and the grid dimensions nx and ny are used with grid spacings given via -I to create the corresponding region. This method can be used when creating grids. For example, -RCM25/25/50/50 specifies a 50x50 grid centered on 25,25.

  6. -Rgridfile. This will copy the domain settings found for the grid in specified file. Note that depending on the nature of the calling module, this mechanism will also set grid spacing and possibly the grid registration (see Grid registration: The -r option).

Optional Arguments

-A[n|z]

Add up multiple values that belong to the same node (same as -Az). Append n to simply count the number of data points that were assigned to each node. [Default (no -A option) will calculate mean value]. Not used for simple mapping.

-D[+xxname][+yyname][+zzname][+dvname][+sscale][+ooffset][+ninvalid][+ttitle][+rremark][+vvarname]

Give one or more combinations for values xname, yname, zname (3rd dimension in cube), and dname (data value name) and give the names of those variables and in square bracket their units, e.g., “distance [km]”), scale (to multiply data values after read [normally 1]), offset (to add to data after scaling [normally 0]), invalid (a value to represent missing data [NaN]), title (anything you like), and remark (anything you like). Items not listed will remain untouched. Give a blank name to completely reset a particular string. Use quotes to group texts with more than one word. If any of your text contains plus symbols you need to escape them (place a backslash before each plus-sign) so they are not confused with the option modifiers. Alternatively, you can place the entire double-quoted string inside single quotes. If you have shell variables that contain plus symbols you cannot use single quotes but you can escape the plus symbols in a variable using constructs like ${variable/+/\+}. Note that for geographic grids and cubes (-fg) xname and yname are set automatically. Normally, the data netCDF variable is called “z” (grid) or “cube” (data cube). You can name this netCDF variable via +vvarname.

-L

Let nsamp override number of samples in each trace.

-M[ntraces]

Fix number of traces to read in. Default tries to read 10000 traces. -M0 will read number in binary header, -Mntraces will attempt to read only n traces.

-Nnodata

No data. Set nodes with no input sample to this value [Default is NaN].

-Q<mode><value>
Can be used to change two different settings depending on mode:

-Qxx-scale applies scalar x-scale to coordinates in trace header to match the coordinates specified in -R.

-Qys_int specifies sample interval as s_int if incorrect in the SEGY file.

-S[header]

Set variable spacing; header is c for cdp, o for offset, or bnumber for 4-byte float starting at byte number. If -S not set, assumes even spacing of samples at the x_inc, y_inc supplied with -I.

-V[level]

Select verbosity level [w]. (See full description) (See cookbook information).

-r[g|p] (more …)

Set node registration [gridline].

-^ or just -

Print a short message about the syntax of the command, then exit (NOTE: on Windows just use -).

-+ or just +

Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exit.

-? or no arguments

Print a complete usage (help) message, including the explanation of all options, then exit.

--PAR=value

Temporarily override a GMT default setting; repeatable. See gmt.conf for parameters.

Examples

To create a grid file from an even spaced SEGY file test.segy, try

gmt segy2grd test.segy -I0.1/0.1 -Gtest.nc -R198/208/18/25 -V

Note that this will read in 18-25s (or km) on each trace, but the first trace will be assumed to be at X=198

To create a grid file from the SEGY file test.segy, locating traces according to the CDP number, where there are 10 CDPs per km and the sample interval is 0.1, try

gmt segy2grd test.segy -Gtest.nc -R0/100/0/10 -I0.5/0.2 -V -Qx0.1 -Qy0.1

Because the grid interval is larger than the SEGY file sampling, the individual samples will be averaged in bins